| Sea Swirl Rotating Return Device |
- Made by hobbyist for the hobbyist
- 1/2" model is mounted in a 5 1/2" x 3 1/4" x 2 1/2" black plastic box & uses a 4 watt motor
small 5 watt motor for 3/4" and 1" models are mounted in a 7"x 5"x 2 1/2" black plastic box
- 9 foot electric cord
- 2 viton o-rings seal around a specialty filled pipe for an extremely low coefficient of friction and giving superior lubrication!!!
- motor is ul listed and csa certified
- floating ball joint type linkage is used to connect motor shaft to oscillating pipe
- oscillates 90 degrees every 60 seconds
- 180 degree oscillating capability available on 1/2" and 3/4" models with optional "y" fitting
- o-rings are permanently lubricated with a synthetic teflon grease
- outer oscillating pipe is machined for standard schedule 40 fittings
- 1/2 and 3/4" models supplied with loc-line on outlet (these are adjustable up or down approx. 30 degrees)
- total height with fitting attached on top:
- 1/2 inch model - 4 1/4 inches
- 3/4 inch model - 4 3/4 inches
- 1 inch model - 5 1/4 inches
- flow rates for each model as follows:
- 1/2 inch model - 550 gph
- 3/4 inch model - 850 gph
- 1 inch model - 1150 gph
- 1/2" model is mounted in a 5 1/2" x 3 1/4" x 2 1/2" black plastic box & uses a 4 watt motor
small 5 watt motor for 3/4" and 1" models are mounted in a 7"x 5"x 2 1/2" black plastic box
- 9 foot electric cord
- 2 viton o-rings seal around a specialty filled pipe for an extremely low coefficient of friction and giving superior lubrication!!!
- motor is ul listed and csa certified
- floating ball joint type linkage is used to connect motor shaft to oscillating pipe
- oscillates 90 degrees every 60 seconds
- 180 degree oscillating capability available on 1/2" and 3/4" models with optional "y" fitting
- o-rings are permanently lubricated with a synthetic teflon grease
- outer oscillating pipe is machined for standard schedule 40 fittings
- 1/2 and 3/4" models supplied with loc-line on outlet (these are adjustable up or down approx. 30 degrees)
- total height with fitting attached on top:
- 1/2 inch model - 4 1/4 inches
- 3/4 inch model - 4 3/4 inches
- 1 inch model - 5 1/4 inches
- flow rates for each model as follows:
- 1/2 inch model - 550 gph
- 3/4 inch model - 850 gph
- 1 inch model - 1150 gph
- Sea Swirl Units are not submersible.
- All Sea Swirl units now have adjustable inlet for easier positioning of incoming water line.
- All units supplied with a black FPT x FPT inlet filling for hard plumbing with PVC and a barb fitting is included for hose connections.
- Stronger backet assembly with 3/8" adjustment screws on 3/4" & 1" models
- Oscillates the return from your existing pump or canister filter 90 degrees every 60 seconds.
- 180 Degree oscillating capability on 1/2" and 3/4" models with optional "Y" fitting.
- Eliminates use of wave makers and power heads
- Greatly improves circulation and helps eliminate "Dead Spots"
- Unlike other units, operates with any pressure, nothing to hide and cannot clog.
- No more unidirectional flow.
- Natural wave motion sweeps away excess mucus and waste products.
- Improved circulation-stimulates growth and carries nutrients to corals and plants.
- Discourages growth of unwanted algae.
- Attaches to top frame of all standard glass aquariums (optional brackets available for acrylic tanks if needed).
- Supplied with adjustable black outlet fittings on 1/2" and 3/4" models (approximately 30 degrees).
- Outer oscillating pipe is machined for standard schedule 40 fittings.
- Maintenance free
- 9 foot electric cord
- 1 year warranty
- Made in the USA - U.S. Patent # 6,321,683
- All Sea Swirl units now have adjustable inlet for easier positioning of incoming water line.
- All units supplied with a black FPT x FPT inlet filling for hard plumbing with PVC and a barb fitting is included for hose connections.
- Stronger backet assembly with 3/8" adjustment screws on 3/4" & 1" models
- Oscillates the return from your existing pump or canister filter 90 degrees every 60 seconds.
- 180 Degree oscillating capability on 1/2" and 3/4" models with optional "Y" fitting.
- Eliminates use of wave makers and power heads
- Greatly improves circulation and helps eliminate "Dead Spots"
- Unlike other units, operates with any pressure, nothing to hide and cannot clog.
- No more unidirectional flow.
- Natural wave motion sweeps away excess mucus and waste products.
- Improved circulation-stimulates growth and carries nutrients to corals and plants.
- Discourages growth of unwanted algae.
- Attaches to top frame of all standard glass aquariums (optional brackets available for acrylic tanks if needed).
- Supplied with adjustable black outlet fittings on 1/2" and 3/4" models (approximately 30 degrees).
- Outer oscillating pipe is machined for standard schedule 40 fittings.
- Maintenance free
- 9 foot electric cord
- 1 year warranty
- Made in the USA - U.S. Patent # 6,321,683
Sea Swirl 1"
Price: $199.99
Price: $199.99
Sea Swirl 3/4"
Price: $174.99
Price: $174.99
Sea Swirl 1/2"
Price: $139.99
Price: $139.99
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
In-Stock Ready To Ship
In-Stock Ready To Ship
In-Stock Ready To Ship
| FREE SHIPPING SPECIAL ON ALL EQUIPMENT ORDERS *. See Ordering Information Page For Detail |
ON SALE $179.99
ON SALE $159.99
ON SALE $119.99
